How do u obtain the left aspect wheel hub tore apart on the Bolens 1054 i received it started out but cant obtain the relaxation of it?

Qusetions: I received the major knob off that u flip in to allow it to be a posi plus the nut that retains it all in but there is certainly like a sleeve wanting point way back again in there it appears like it turns off the threads but its received a keyway sitting back again in there i believe thats what on earth is keeping it if anyone is aware how u tear them apart any information would b appreciated many thanks.

Answers:I had a 1964 Bolens that from what I try to remember, had a related, if not the similar transmission which was about the 1054. i've supplied you having a website link on the transmission schematic. Refer to pages eight & nine. As I recall, immediately after taking away the retaining ring and big adjusting nut, there is certainly an additional instead big nut that demands to get eliminated. immediately after taking away that, it can be a issue of pulling the hub off. it could require some persuasion having a mallet to arrive off. (light taps if you are making use of a difficult confronted hammer----you could crack the hub) i am assuming you will be heading immediately after the seal or an individual with the bearings or even a sheared essential.

Good Luck!!

http://sonnys_bolens.tripod.com/manuals/…