Will polyurethane maintain stone in location?

Qusetions: i am heading to coat a wood chair in stone. i used to be initially preparation on utilizing Liquid Nails or Loctite adhesive and after that covering it in polyurethane, but then I considered what if I just set a large coat of polyurethane around the chair, coated it in 1" stone, allow it dry, then coated it a further few instances. Would that maintain the stone in location?

Also, how very well would polyurethane stick with stone? i will likely conclude up testing it myself, but nevertheless.

Answers:Lots of issues to cover right here.
First, poly will not likely get the job done as an adhesive for what that you are speaking about.
Head for your area tile showroom and get some thinset. Non modified if this chair might be stored outdoors.
Set the stone with this particular content.
I do not know as well lots of solutions that could fill in amongst stones to produce the sitting region flat for sitting on. you will find epoxy polyurethanes that go on being a gel and you also can develop up really thick. These will fill in amongst the gaps of stones to produce the entire surface flat.
If the flat issue isn't really so crucial i might use Stonetech superior Gloss Lacquer. it truly is about $50 a gallon and it's accepted for exterior use. It will not likely fill in amongst stones nonetheless it will highlight the colours and secure the stone even in exterior settings.

Answers:Oil-based polyurethane in fact functions excellent as an adhesive. I set a stone on the 2x4 and applied a thick layer covering the region surrounding the stone and on best from the stone. It took about every week to dry but i used to be about to set about five lbs of stress around the stone with no it coming off.

Report Abuse

Answers:I'm within the course of action of utilizing DAP Concrete Sealer since the adhesive due to the fact I figured it might act equivalent to grout and fill within the spaces amongst the stones. The sealer bonds to wood and stone and to date is doing work excellent.

I failed to want to make use of PL due to the fact all of their colours had been in tan. DAP is gray.

Report Abuse

Answers:what u had been initially considering is superior... use a products known as PL premium it retains something polyurethane may possibly maintain for a bit when but when there exists any motion or stress it can fall short a great adhesive will bond it and you also wont need to redo it actually once again. and no polyurethane will not likely bond very well to stone it can conclude up flaking off inside a brief volume of time, go and obtain a superior gloss stone sealer and give it numerous thin coats, the additional coats the glossier it can turn into any in which from six to twelve coats will provide you with that glass like shimmer that your hunting for.