If i've seventy five yards of yarn, and i minimize it all into eight inch items, the number of items will i've?

Qusetions: three feet to a lawn = 225 feet (3x75)
12 inches to a foot= 2700 (12x225)
divide by 8" length
which offers you 337.5

so *technically* you will not likely be cutting all of them into 8" items, seeing that you may have one that's 4" :>)

Answers:75x3x12

get the job done it out like a fraction


= 75x3x12 above eight =75x3x3 over2 =75x9over2 =675over2 = 337 and1/2


indicate your workings so nthe instructor can see the way you obtained it research performed lol

Answers:I like tough problems. The accurate reply is 338 and 1/2 items. absolutely everyone is forgetting the very first piece that commences at zero.

Answers:a lawn is 36 inches. seventy five x 36 = 2700 inches. divide by eight offers you 337 items and four inches left above.

Answers:75 instances three is 225,so 225 feet instances twelve (inches) then divide by eight reply:337.5

Answers:The reply is 337.5 items.

Answers:75 x36/8=337.5

Answers:28?

Answers:try cutting them up and counting them

Answers:Have you ever before heard of an invention referred to as "arithmetic"? Divide seventy five by eight and there is your reply.

Some assist make sure you!! i've strength to my lights upstairs but two lights will never light up, any dazzling recommendations?

Qusetions: Can another person assist me make sure you!!
i've strength to my lights upstairs but two lights will never light up even if strength is heading towards the light fittings, a person is while in the landing and then the other inside of a bed room.
I have taken the switches of to check out the wiring, replaced bulbs and so on but nonetheless no lights any guidance can be handy.
Also no electrician is obtainable right up until the center of subsequent week!!

Answers:Check the sockets having a tester. in case you have strength from your shell of your socket towards the middle pin then the pin might be mashed as well far down to create get in touch with along with the bulb. occasionally you'll be able to pry the tab out somewhat having a modest screwdriver along with the strength OFF!
If you do not have strength in the socket it really is almost certainly negative and wants to get replaced.

Answers:I dislike to inquire a stupid query but do any of those lights that do not do the job have a very pull chain or change about the light? you'd probably have strength towards the light although not acquiring it get towards the bulb? occasionally the easiest items are above looked. in case you have strength in the light socket then there can be no want to bypass the change. occasionally it is excellent to get started along with the fundamentals.

Answers:I concur with "R". all of us has asked the very simple items, nevertheless it couild be an issue along with the neutral aspect of your circuit, not only about the "hot" aspect of your circuit, and when you do not know or have an understanding of what that is definitely, then use a flashlight right up until the electrician will get there!

Answers:Check the breaker box to determine if any breakers may perhaps have flipped - all of them need to be while in the very same placement, if a person is from area flip it on to determine if it fixes the issue!

Answers:"Any dazzling ideas" I see what you did there.

Wait for an electrician, i definitely wouldn't have confidence in the Y!A local community with electronics.

Will polyurethane maintain stone in location?

Qusetions: i am heading to coat a wood chair in stone. i used to be initially preparation on utilizing Liquid Nails or Loctite adhesive and after that covering it in polyurethane, but then I considered what if I just set a large coat of polyurethane around the chair, coated it in 1" stone, allow it dry, then coated it a further few instances. Would that maintain the stone in location?

Also, how very well would polyurethane stick with stone? i will likely conclude up testing it myself, but nevertheless.

Answers:Lots of issues to cover right here.
First, poly will not likely get the job done as an adhesive for what that you are speaking about.
Head for your area tile showroom and get some thinset. Non modified if this chair might be stored outdoors.
Set the stone with this particular content.
I do not know as well lots of solutions that could fill in amongst stones to produce the sitting region flat for sitting on. you will find epoxy polyurethanes that go on being a gel and you also can develop up really thick. These will fill in amongst the gaps of stones to produce the entire surface flat.
If the flat issue isn't really so crucial i might use Stonetech superior Gloss Lacquer. it truly is about $50 a gallon and it's accepted for exterior use. It will not likely fill in amongst stones nonetheless it will highlight the colours and secure the stone even in exterior settings.

Answers:Oil-based polyurethane in fact functions excellent as an adhesive. I set a stone on the 2x4 and applied a thick layer covering the region surrounding the stone and on best from the stone. It took about every week to dry but i used to be about to set about five lbs of stress around the stone with no it coming off.

Report Abuse

Answers:I'm within the course of action of utilizing DAP Concrete Sealer since the adhesive due to the fact I figured it might act equivalent to grout and fill within the spaces amongst the stones. The sealer bonds to wood and stone and to date is doing work excellent.

I failed to want to make use of PL due to the fact all of their colours had been in tan. DAP is gray.

Report Abuse

Answers:what u had been initially considering is superior... use a products known as PL premium it retains something polyurethane may possibly maintain for a bit when but when there exists any motion or stress it can fall short a great adhesive will bond it and you also wont need to redo it actually once again. and no polyurethane will not likely bond very well to stone it can conclude up flaking off inside a brief volume of time, go and obtain a superior gloss stone sealer and give it numerous thin coats, the additional coats the glossier it can turn into any in which from six to twelve coats will provide you with that glass like shimmer that your hunting for.

Around what's going to this price tag me?

Qusetions: just how much would it price tag to assemble approximately a 700 square foot making behind my residence thats insulated and this kind of i might tap in to the homes h2o and electricity--if thats doable

i dont want to understand the price tag like labor just raw resources thx :P

im pondering of the mini visitor residence but money are incredibly short

Answers:Sewer connections? Heated? Air conditioned? you obtain h2o in through the residence, then the place does it go? You ought to tie in on the sewer that will price tag 1-3 thousand. Furnace, plumbing, windows doorways, hardware, Cabinets, fridge, stove, the real making resources are low cost,insulated 700sq ft making...maybe 5000. it truly is the factors that get it from a shell to a mini visitor residence that fees. for those who definitely desire a mini visitor residence that folks can poop and shower in. I'd say twenty,000.00 minimal for those who obtain as very much utilised things when you can. Odd sized windows and so on.

Answers:MUCH extra facts is required. begin by contacting area contractors for bids. at this time, you will not have sufficient detail to produce a undesirable guess.

I will not know the place Ashley obtained the $2,000 selection. The only selection in the hyperlink she gave is $76,000 to get a framework making use of twelve containers. That arrives to around $6,000 per container.

Answers:metal conex box... two,000 bucks ish plus they arrive watertight and solidly created... will not laugh... verify out these pics from treehugger.com

http://www.treehugger.com/files/2005/01/…

Just refer for your area ordinances in advance of paying your funds and make certain you obtain permits pulled.

In my RV drinking water won't drain from sink when applying pro vent backs up then drains extremely little by little?

Qusetions: The drain pipe has an obstruction.